What Saab 9-3 Key Replacement You ll Use As Your Next Big Obsession

How to Replace the Replacement Key Battery For the Saab 9-3

saab centre milton keynes owners must follow a set of steps that are unique to add a second ignition key. This requires an electronic handheld computer, referred to as Tech-2 that is operated by the dealer. Then the transponder is replaced and a key have to be purchased.

It is a good idea to rotate your keys so that one does not wear out more quickly than the other. This will help to keep your keys in top condition.

Replacement Case

Unlike the classic saab key programming keys of the past keys, the new key fobs contain electronics which makes it hard to create a duplicate. This has made car theft a lot more difficult than it was twenty years ago. It has also made it more expensive to replace keys lost.

Saab 9-3 owners must have two keys working. If one gets lost, it costs a lot to replace it in the vehicle because it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers usually charge between $100 and $200 to do this.

There are a few ways to avoid these high cost. Some parts retailers can look up the code from a spare key (usually the same one that opens the doors and switches the ignition) and cut a new key blade from metal for a fraction of the dealer's cost. The key must be exactly the same as the original for it to work in your vehicle.

You can also replace the case yourself by following these steps. You'll need a flathead and a lot of patience. With the screwdriver, break apart the plastic and remove the emergency key. When the case is opened, remove all electronics and place them in the new case. Insert the correct key and badge into the case.

Replacement Battery

The replacement battery for the saab key battery replacement 9-3 is a cheap component that can be replaced quickly and easily. This DIY video from YouTube Cyclone Cyd shows how to get a saab replacement key to replace the remote key fob battery in only four steps. This tutorial should work for any modern Saab 9-5 key Replacement-type key fob, however, the procedure may differ slightly.

The first step is to locate the button that will release the backup key within the fob. This button is typically located on the back of your fob just below the Saab Logo. Then use a flathead screwdriver to insert into the small hole in this button. This should be sufficient to open the fob case to allow you to change the battery.

Once you have installed the new batteries CR1632, it is possible to restore the remote key fob. You can then program it into your car. The whole process should not take more than one hour. This is a very easy process that doesn't require any special tools.

The process is a bit more complicated in the event that you lose your key, but it's possible. The dealer will have to determine the VIN of the car and then order a replacement key blade and TWICE module that has the correct unique code. The dealer will then need to program the key using MDI, a brand new software tool.

replacement saab 9-3 key Key Fob

The key fob has an internal battery that is used to lock and unlock your vehicle. They have a limited life span and eventually will die. This is a frequent issue in all vehicles. The good news is you can replace the battery in all key fobs, and not have to replace the entire case. Amazon sells replacement fobs that have all the electronics installed. It is easy to open the case and replace the batteries. It is important to note that you'll have to remove the emergency key first, and you can do this by inserting the small screwdriver flathead into the slot in the middle of the case. Work the screwdriver around the case until it will split open, making it simple to remove.

When you are ready to replace the keys ensure you have a spare because this can cut down the total cost by a significant amount. If you have an additional key, ask the dealer to cut it and program it to your car. This is a lot less expensive than purchasing a brand new key fob.

It is possible to add a second key to your car in the event that you don't have one, but it takes lots of research and work. It will cost you a few hundred dollars to purchase a second car key. The computer in the car also needs to be programmed. Professionals can do this however it's a costly option.

Replacement Ignition

The modern SAAB 9-3 has an advanced alarm system that is based on a key code. If you lose your sole key, it could be costly to replace it with another one, as the car has to have a specific computer installed and also be programmed to accept a new key. Locksmiths typically aren't able to program this and a dealer will charge several hundreds of dollars just to program the new key!

If you've lost your only working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) in order to make a replacement, and they will charge a premium for it. Instead we can reprogram the EEPROM in your current car computer to prepare it for a new key, saving you over 50% of what you'll have to pay at a dealership.

If you've owned a SAAB 9-3 for an extended period of time and you're aware of the ignition keys aren't very durable. If your ignition key isn't functioning properly, it is time to consider replacing it. They can become sticky and the buttons are known to fall off. It's not as difficult as you think to replace the ignition key. With the right tools, it is able to be accomplished in a short time.