How To Beat Your Boss On Subaru Forester Replacement Key

How to Replace a Subaru Key Fob

For those days when you don't want to carry around your keys while mountain biking, hiking or kayaking, Subaru's latest Foresters, Outbacks and Crosstreks have an option that isn't widely known. This handy feature lets you lock your car and leave it somewhere safe.

You can purchase an replacement Subaru remote control from a hardware shop or online. You can visit an Subaru dealer for a more personalized service.

How to Replace your Subaru key fob

If you've lost your key fob or simply want to replace its battery, a few simple steps can help. First, make sure that you have a replacement battery (ideally CR2032 3V) prepared, along with a screwdriver. A spudger may be needed to remove the circuit board from the case of the key fob. Before replacing the battery ensure that you have read your owner's manual to ensure that you are using the right battery type for your vehicle.

Press the small silver button that is located at the back of the Subaru key fob. This will let the key out of its metal and let you take it off. Insert the tip of a screwdriver into this slot to open up the gap between the body of the key fob and the front. This will allow you access to the internal components. Remove the key from the metal and use a screwdriver to remove one of the housings that accommodates the control module that houses the battery.

Once the housing has been removed then locate the flat circular battery inside. The battery should be easily visible as it is held in place by tiny tabs. Remove the battery from its tiny tabs and replace it with a new subaru key one, ensuring that the number is facing up. After that, reassemble your key fob and test it to ensure that it works as intended. In most cases, your car should sound a chime, and the locks should engage when you press the lock button on the key fob.

Why would you go to a dealer to get a Key Fob Replacement?

Subaru key fobs can be a useful way to lock and start your car remotely. As with all electronic devices keys can break or become obsolete. There are a few options available for replacing the key fobs on your Subaru in Bartow or Lake Wales.

Find out what kind of key fob that you have. The older models that have an actual key inside tend to be more of a teardrop form, while the newer models have a bulging rectangle. Then, you can open the case to expose the circuit board of the transmitter and battery. Remove the old battery and replace it with a fresh one. Make sure to use the correct polarity and ensure that your battery is placed correctly otherwise your car may not start.

Dealerships typically have the most comprehensive software for your specific automobile model. They also can provide you with an extra secure replacement. However, they do have higher overhead costs and cost more than a locksmith or hardware store.

You might also find a replacement at an auto parts store or online. If you opt to go this route, beware that Consumer Reports has found some off-brand remotes don't function properly with the system in your car. Many online stores that sell replacement key fob subaru remotes will also require proof of ownership in order to program the new remote. You can request your local mechanic or dealer to program it for you. But, this will cost more.

Why Visit a Hardware Store to Replace a Key Fob?

The key fob lets you to start your car and then unlock it without the use of a physical key. Subaru's key fobs have several features that make driving easier and more enjoyable. They can lock and unlock the doors as well as start and unblock the engine, unlock and unlock the gas cap as well as turn on the light.

Most newer vehicles include a fob that requires programming before you can use it. The manufacturer provides these devices with unique codes that only dealerships and locksmiths have access to.

If you are unable to locate or repair the fob, it's best to go to a retailer. They have the software and tools to reprogram a blank fob so that it can work with the specific model. They can also cut a new key and insert it into the fob for you.

If you want to try and save money, some online sellers offer blank key fobs that they can program for you. These aren't as reliable as those purchased directly from the dealer.

You can find the 8-digit number on the door sill of the driver's car. Once you have the first digit written down you can get in your vehicle and press the lock button the number of times it takes to match that number. Continue to do this for the remaining number. After entering the last number, take out the ignition key and listen for a chime that signals that the system has been properly programmed.

Why should you visit a Subaru Dealership to Replace a Key Fob?

While a simple key with an cylinder that is attached to the car fender is the norm, many motorists now choose to use an electronic key fob that can lock, unlock and even starts their cars. The fobs transmit an electronic signal to the vehicle through multiple antennae. Then, it uses a transponder chip to confirm that the driver is an authorized user. This is the reason that many newer models require drivers to go to a dealer to get their fobs replaced, according to Consumer Reports.

It may seem like an inconvenience, but it's much better to take it to the dealer. This will ensure you receive an authentic replacement subaru keys key fob and that your car has been programmed to accept the key fob. The cost of a duplicate or replacement fob is covered by the warranty on your car which will save you money over time.

Examine the inside of the inside of your Subaru key fob to locate an opening in the gap between the front and the back (instructions on opening the fob will be found in the owner's guide). Once you find this spot and can pop the fob's lid open, you can remove it using the flat-head screwdriver. Remove the old battery and replace it with one of 2025. Then you can put the fob pieces back together.